Kucuksu Rasathane
Uskudar Istanbul Turkey
Monday - Friday 07-18:00
Closed on Weekends
MiniFOK
The Machine has a significant productivity and it considerably increases your labor’s production capacity. A special and carefully designed pallet system assuring an excellent cable drip and decrease the damage risk. Clamping system adjust the cable outer diameter fluctuation/tolerance. In addition to that, its high-tech engineered design and structure improve blowing performance. Each part of machine is engineered and produced to meet and exceed the expectation of customer requirements. MiniFOK it is equipped with a distance and speed indicator.
MiniFOK Cable Blowing Machine - Compactness
MiniFOK is a Fiber optic cable blowing machine designed to blow cables into telecommunication ducts and micro ducts by using of compressed air. Having 3 pallet options as 2,5-4mm, 5-8mm and 9-12mm to blow the cables having min. 2,5mm to max. 12mm. This fiber optic cable blowing machine works with one air motor for blowing the cables and tubes. Due to 1 air motor, it can perfectly blow fiber optic cables into ducts.
Special pallet design will allow you to install your cables under muddy field conditions and Cable Blowing Power will not be decreased. You can set cable installing speed and direction with control valve. A wisely designed exit box will supply highly productive leading for pressured air into telecom ducts. Quick air connection makes your business easier with an easy plug-in method. It’s completely Made in Turkey with international standards.
Single air motors will ensure to continuous high effective cable blowing power. You can switch on or off the air entering telecom ducts with guidance of valves. Festo Lubricant system takes off moisture of pressured air which comes from compressor and supplies continuous lubricate for air motors.
Content
CONSISTING OF:
- 1set (2pcs) of Belt
- 1pcs Mechanical Meter Indicator
- 1pcs Air Motor
- 1pcs Air Lubrication System
- 1set Cable Aligning Parts
- 1pcs Direction Valve Backward and Forward Directions
WITH:
- 1pcs Operator Guide
- 1pcs Cable Insert any diameter prefered.
- 1set Duct Insert
- 1pcs Duct Connection Tool any diameter prefered.
- 30pcs Blue Nutring (6pcs per Cable Dia)
- 2m Black Rubber O-Ring
- 1pcs Protected Wooden Case with holder
- 1pcs Quick Insert Air Jack
- 1set Tool Kit
- 1pcs Box for plastic tools
WITHOUT:
- Air Cooler
- Lubricant Oil
- Air Compressor
Technical Data - MiniFOK Cable Blowing Machine
Standard version | 1pcs of pneumatic motor drive |
Type | MiniFOK |
Pallet Options (mm) | 2,5-4 / 5-8 / 9-12 |
Cable dia. [mm] | 2,5-16 |
Duct OD [mm] | 7-32 |
Drive unit | Pneumatic |
Max. air circulation of motor [m3/min] | 1 (at 4 bar) |
Torque Nm – Max. Power | 8,5 |
Max. distance to blow at once (Cable Dia. 6mm – Duct Dia. 16mm) (m) | 1500 |
Linear pressure on cable [N/cm] | 0-101 |
Max. speed [m/min] | 80 |
Max. air pressure [bar] | 16 |
Max. water pressure [bar] | 23 |
Dimension of tools and accessories case l x w x h [mm] | 640 x 460 x 440 |
Total weight [kg] | 49 |
Compressor Capacity Recommendation
Efficiency | 1,0 m3/min |
Working pressure | 15 bars |
· These are minimum compressor requirements up to Duct Dia. 20mm. You may use higher capacity of compressor which can increase the effectiveness. You can overcome the handicap of improperly installed ducts.
